GRACO® KING SPRAYER ACCESSORIES
GENUINE GRACO® PARTS & ACCESSORIES
It’s happened before: A critical piece of equipment meets an unfortunate end due to the failure of one, tiny component. That’s why Graco doesn’t build just any off-the-shelf part into its equipment. They select and manufacture high quality components our customers have come to rely on.
Graco’s equipment is superior because its parts are superior – in design, quality and performance.

Designed, tested & built for reliability
Great design is in the details. At Graco, their engineering team designs and specifies every part that is built into their machines.
They test and re-test their parts to make sure they provide you with outstanding performance, long life and durability.
You can’t afford your equipment to fail in the field. As the trusted brand you rely on, neither can we.
Each quality part is dependent on another
Graco equipment is designed as a unified system, not as a collection of stand-alone parts. Every part is designed with a careful eye toward the parts it will interact with, and adjusted accordingly. When any of a system’s parts is replaced with a lower quality, non-Graco part, the result may be a ripple effect that degrades not only its own functionality, but that of other parts throughout the system
Protect your business with genuine Graco parts
When you need replacement parts, you could purchase cheaper alternatives. But why risk it? Off-the-shelf parts may hinder performance and possibly even damage your Graco equipment. You invest in Graco equipment because it is superior quality. It’s what your business depends on. So protect your investment and your future. Trust only genuine Graco parts.
SPRAY GUNS
While they are lightweight and comfortable to use, Graco’s XTR+™ guns can handle the toughest coatings and perform in the most extreme spray conditions. All airless spray guns are made with pride and built to exacting standards in Graco’s Sioux Falls, South Dakota, U.S.A. manufacturing facility.
XTR5+ Maximum working pressure: 5000 psi (345 bar, 34.5 MPa)

ITEM # | DESCRIPTION | |
XTR520 | Round handle, four-finger trigger, no tip | REQUEST A QUOTE |
XTR521 | Round handle, four-finger trigger, flat switchtip | REQUEST A QUOTE |
XTR522 | Oval-insulated handle, four-finger trigger, XHD RAC switchtip | REQUEST A QUOTE |
XTR523 | Oval-insulated handle, two-finger trigger, XHD RAC switchtip | REQUEST A QUOTE |
XTR524 | Round handle, four-finger trigger, XHD RAC switchtip | REQUEST A QUOTE |
XTR525 | Round handle, two-finger trigger, XHD RAC switchtip | REQUEST A QUOTE |
XTR7+ Maximum working pressure: 7250 psi (500 bar, 50.0 MPa)

ITEM # | DESCRIPTION | |
XTR720 | Round handle, four-finger trigger, no tip | REQUEST A QUOTE |
XTR721 | Round handle, four-finger trigger, flat switchtip | REQUEST A QUOTE |
XTR722 | Oval-insulated handle, four-finger trigger, XHD RAC switchtip | REQUEST A QUOTE |
XTR723 | Oval-insulated handle, two-finger trigger, XHD RAC switchtip | REQUEST A QUOTE |
XTR724 | Round handle, four-finger trigger, XHD RAC switchtip | REQUEST A QUOTE |
XTR725 | Round handle, two-finger trigger, XHD RAC switchtip | REQUEST A QUOTE |
GUN TIPS & GUARDS
Graco XHD™ Reverse-A-Clean© (RAC)
SwitchTips are specifically designed and individually tested for spraying high-solids coatings at high pressures up to 7250 psi (500 bar), while still optimizing the specified spray pattern. All spray tips are manufactured in Sioux Falls, South Dakota, U.S.A. and individually tested before leaving the facility.
XHD RAC SwitchTip™ and Guard
- SwitchTip – Minimize downtime by changing tip sizes in seconds without removing tip guard and housing
- Save time by not having to use a screwdriver to remove the tip
- Locking tab ensures tip stays securely in guard
- High quality carbide lasts longer
- Designed to easily clear clogs

ITEM # | DESCRIPTION | |
XHD001 | 7/8 in aluminum thread, compatible with Graco XTR+ and XHF guns | REQUEST A QUOTE |
XHD003 | 7/8 in stainless steel thread, hand-tightened, compatible w. XTR+ & XHF guns | REQUEST A QUOTE |
XHD005 | 11/16 in aluminum thread, adaptable with non-Graco guns | REQUEST A QUOTE |
XTREME-DUTY™ HIGH-PRESSURE HOSES
Graco Xtreme-Duty high-pressure hoses are flexible and durable, yet extremely easy to use. Because hoses take a beating on the jobsite, Graco puts its hoses through a unique safety testing regimen in our state-of-the-art manufacturing facility. Each hose design undergoes impulse, burst, flexibility and cold bend testing to give you top quality, durability and reliable performance. Xtreme-Duty hoses are available in different lengths, diameters, and three different pressure ratings.
The length and diameter of hose you use affects the pressure drop of fluid to the spray gun. A longer hose has a greater pressure drop. A smaller hose diameter has greater pressure drop. If using two different diameter hoses coupled together, attach the larger diameter hose to the pump and the smaller hose to the gun to minimize pressure drop.
Designed for durability
- Chemical-resistant hose cover withstands a variety of solvents, acids and bases
- Cover stands up to sunlight, ozone, oxygen and extreme weather conditions
- Color-coded by pressure to take the guesswork out of using the right hose

ITEM # | DESCRIPTION | |
H67550 | 3/4 in x 50 ft (15.2 m), 6500 psi (448 bar, 44.8 MPa) | REQUEST A QUOTE |
H77550 | 3/4 in x 50 ft (15.2 m), 7250 psi (500 bar, 50.0 MPa) | REQUEST A QUOTE |
Hoses in other lengths, diameters and pressure ratings available upon request. Contact us for more details | REQUEST A QUOTE |
OTHER ACCESSORIES
We offer a huge variety of other guns, gun accessories, heated hoses (for plural units), complete pump lowers & replacement parts, sprayer packings, heaters, hoppers & tanks. If you are looking for something not listed here, contact us for more details and let our team of experts help you find exactly what you need. We’re here to help!